Sub-assembly- ((pre-assembled screw + washer) and and loctite - Germany
2026-09-24 - We are looking for one of our sub-assembly step (installing a washer onto a screw and applying Loctite) to be outsourced. Therefore would like to know if you could do this process for us. Potential requirements: DIN 912 M3 screws length 8 mm (Side note: currently we have 40K on hands). Screw- Screw DIN 912 (ISO 4762) - M3x8 - A2 . Washer - Flat Washer DIN 9021 3,2x9x0,8 A2 Washer permanently retained on the screw- Important Pre-applied thread locking patch (equivalent to Loctite functionality) Example: Loctite Precote® 80 / Precote® 85 (you can also suggest us, we need the best quality). Goal: The screw is A2 and it goes in aluminum part so sometime to test something we need to unscrew it so we should be able to use the same screw 2 to 3 times. This means the Loctite should not fade or go off. Suitable for high-volume production. For 2026 we need 34 * 5000 = ~205K units Scope- The screw and the washer with Loctite will go in the aluminum stand. So the idea is the washer should not move when the screw is removed from the box. We would like to know if you can do this sub-process for us, and further details on it . We need to start the production as soon as possible I would suggest to send us the sample so that we can test. I am looking forward to receiving a response as soon as possible.
fasteners - Germany
2025-10-23 - Please see attached.
ISO 7090 200 HV manufacturer wanted - Germany
2025-07-19 - Looking for a manufacturer or supplier for ISO 7090 in hot-dip galvanized
DIN 74361 galvanized 14.5 mm - Germany
2025-06-06 - We request a quote for 10,000 Limesring C DIN 74361 galvanized 14.5 mm Best regards
Hexagon screws, DIN EN ISO 4016, M52 and M45 including nuts and washer - Germany
2025-01-07 - Below you will receive a price request for • 416 pieces of hexagon bolts (DIN EN ISO 4016), M52 including nuts (DIN EN ISO 4034) • 176 pieces of hexagon bolts (DIN EN ISO 4016), M45 including nuts (DIN EN ISO 4034) • 832 pieces of washers (DIN EN ISO 7091) for M52 • 352 pieces of washers (DIN EN ISO 7091) for M45 The bolts are intended for a DN2200, PN10 and DN1800, PN10 weld neck flange connection. Can you please send me an offer for the two items mentioned above. Thank you very much. If you have any questions, please feel free to contact me. Kind regards
NordLock NLX12 - Germany
2024-10-05 - 20.000 pcs - NLX12 (NORDLOCK)
ISO 7089 - Germany
2024-10-02 - Washer ISO 7090 Steel 200HV 4000 pcs. 45 (alt. acc. to ISO 7090....) Best Regards
Circlip DIN 984 140x4 - Germany
2024-05-02 - Can you please give us an offer for delivery time and price for 1000 pieces. Submit retaining rings DIN 984 140x4?
DIN 128 - Germany
2024-02-21 - 20.000 pcs DIN 128 - FSt tZn A 20 30.000 pcs DIN 128 - FSt tZn A 16
fasteners - Germany
2023-11-16 - Could you plase check if you can offer the attached inquiry? Thank you very much.
DIN 472 J 50 x 2 made of 1.4122 INOX - Germany
2021-08-02 - We are looking for the following item at short notice (max. 1 week delivery time) 900 pieces DIN 472 J50x2 made of 1.4122 stainless steel INOX
DIN 1440-St 3 - Germany
2021-05-07 - Washer 200,000 pieces.
DIN 440-St R 6.6 zinc / nickel - Germany
2021-05-07 - Surface according to EN ISO 4042 zinc / nickel, min. 8 mil., Glued pads are not allowed. 150,000 pcs 250 000 pcs
DIN 440-St R 6.6 HDG - Germany
2021-05-07 - Hot-dip galvanized washers, glued washers are not allowed. 150,000 pcs 250 000 pcs
DIN 440-St R 11.0 - Germany
2021-05-07 - Surface according to EN ISO 4042 zinc-7-nickel, min. 8 my. Bonded pads are not allowed. 40,000 pcs 80,000 pcs